Advanced - NetComm 3G29WN2 User Manual

Advanced

This screen allows you to control the following advanced features of the Wireless Local Area Network (WLAN) interface:
Select the wireless channel which you wish the router to operate from.

Force the transmission rate to a particular speed.

Set the fragmentation threshold. This can be used to improve throughput in noisy or congested situations.

Set the RTS threshold. RTS stands for "Request to Send". This parameter controls what size data packet the low

level RF protocol issues to an RTS packet. The default is 2346.
Set the wake-up interval for wireless clients using power-save mode.

Set the beacon interval for the access point.

Set Xpress mode.

Please see the Table below for an explanation of the advanced wireless settings.
Click the Apply/Save button to set any changes to the advanced wireless configuration.
FIELD
Band
Channel
Auto Channel Timer
802.11n/EWC
Bandwidth
802.11n Rate
802.11n Protection
Support 802.11n Client Only
54g Rate
NetComm 3G29WN2 Dual ADSL2+/3G Gateway
25
Figure 18: Wireless - Advanced Settings
DESCRIPTION
The frequency of the wireless network. 2.4GHz is standard.
Allows selection of a specific channel (1-13) or Auto mode.
The Auto Channel sets the length of time it takes to scan a channel in minutes.
An equipment interoperability standard setting based on IEEE 802.11n Draft 2.0 and
Enhanced Wireless Consortium (EWC).
Drop-down menu specifies the following bandwidth: 20MHz in 2.4G Band and 40 MHz in 5G
Band, 20MHz in both bands and 40MHz in both bands.
Drop-down menu specifies the following fixed rates. The maximum rate for bandwidth,
20MHz, is 130Mbps and the maximum bandwidth, 40MHz, is
270Mbps.
Turn off for maximized throughput. Turn on for greater security.
The option to provide wireless Internet access only to clients who are operating at 802.11n
speeds.
In Auto (default) mode, your Router uses the maximum data rate and lowers the data rate
dependent on the signal strength. The appropriate setting is dependent on signal strength.
Other rates are discrete values between 1 to 54 Mbps.
www.netcommwireless.com