Table of Contents
Advertisement
Advanced Configuration – Web
User Interface
What can you do from here?
By logging into the web user interface, you are able to configure your 3G29WN2 with a wide array of basic and advanced settings.
From setting wireless security, to backing up your routers settings, uploading new firmware and setting parental controls, the web
user interface is a handy tool for personalizing your device to maximize its potential. Read on for a more advanced description on all
elements of the web user interface.
Logging into the user interface
To login to the web interface, follow the steps below:
NOTE: The default settings can be found in Default Settings.
1.
Open a web browser and enter the default IP address for the Router in the web address field at the top of the window. In this
case the default IP address is http://192.168.1.1
NOTE: For local administration (i.e. LAN access), the PC running the browser must be attached using either an Ethernet or wireless
connection to the router. For remote access, use the WAN IP address shown on the WUI Homepage screen and login with
remote username and password.
2.
A dialog box will appear, as illustrated below. Enter the default username and password, as defined in the Default Settings
section.
User Name – admin.
Password – admin.
3.
Click OK to continue.
NOTE: The login password can be changed later (see Access Control > Passwords).
NetComm 3G29WN2 Dual ADSL2+/3G Gateway
17
Figure 11: 3G29WN2 Login
www.netcommwireless.com
Advertisement
Table of Contents
