Table of Contents
Advertisement
Quick Links
Information
Product Code: 3G10WVT Telstra TURBO™ GATEWAY
Gateway Firmware Version: 3G10WVT‐L101‐S306TMB‐T01_R11
Module Firmware Version(PPP Mode): K2_0_7_18BT/K2_0_7_19AP
Hardware Version：96358G‐133V or 96358G‐133VB
Update Tool File name:
3G10WVT_FW Update Tool_T01_R11.zip
Date: February 3, 2010
Updates (base on FW: T01_R07)
The main purpose of the last release T01_R11 FW release is fixing the 3G drop‐out issue observed at
some locations. The new FW combination (gateway FW and module FWs K2.0.7.18/K2.0.7.19) in the
one‐click tool were tested and proved to fix the issue.
Fixes:
1. Fix the 3G drop‐out that happens when there is little data traffic go through. This issue
happens usually at night in CBD areas.
2. Provide busy tone when gateway detects no network instead of dial tone.
3. Improve the WPA/WPA2 authentication mechanism to prevent the Radius server from
rejecting authentication.
Change:
1, USB Storage default setting change to
NetBios name: 3G10WVT
Directory name：USB‐Storage
New features:
1. The circuit‐switched telephone interface allows manual activation of supplementary services.
The instructions on how to use those supplementary codes are listed as appendix.
2. Add an option on the Next G Setting page to allow user deletes the pre‐set APNs
permanently from the web GUI. Network administrator can apply this feature to restrict the
3G10WVT to provide circuit switch call only (no data service) or user single specific APN.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NetComm 3G10WVT
Summary of Contents for NetComm 3G10WVT
- Page 1 Information Product Code: 3G10WVT Telstra TURBO™ GATEWAY Gateway Firmware Version: 3G10WVT‐L101‐S306TMB‐T01_R11 Module Firmware Version(PPP Mode): K2_0_7_18BT/K2_0_7_19AP Hardware Version：96358G‐133V or 96358G‐133VB Update Tool File name: 3G10WVT_FW Update Tool_T01_R11.zip Date: February 3, 2010 Updates (base on FW: T01_R07) The main purpose of the last release T01_R11 FW release is fixing the 3G drop‐out issue observed at some locations. The new FW combination (gateway FW and module FWs K2.0.7.18/K2.0.7.19) in the one‐click tool were tested and proved to fix the issue. Fixes: 1. Fix the 3G drop‐out that happens when there is little data traffic go through. This issue happens usually at night in CBD areas. 2. Provide busy tone when gateway detects no network instead of dial tone. 3. Improve the WPA/WPA2 authentication mechanism to prevent the Radius server from rejecting authentication. Change: 1, USB Storage default setting change to NetBios name: 3G10WVT Directory name：USB‐Storage New features: 1. The circuit‐switched telephone interface allows manual activation of supplementary services. The instructions on how to use those supplementary codes are listed as appendix. ...
- Page 2 Appendix: Supplementary Services Call Forward Busy function 1.Call forward busy on, press "*24*" or “*67*” and key in forward phone number(phone B) , then press "#”. If succeed, user will hear “dododo”; 2.Call forward busy off, Press "#24#" or #67#”. If succeed, user will hear “dododo”; 3.Call forward busy Status, press "*#24#"...
- Page 3 3. Call forward unreachable Status. Press "*#62#". ON: continuous low-pitched tone. OFF: continuous high-pitched tone. 4. Power off 3G10WVT and use phone A call to 3G10WVT's phone. The phone call will be forwarded to the nominated phone number (phone B).
- Page 4 1. 3G10WVT call to phone A, and press “Recall” or “Flash” +"2". 2. Then 3G10WVT call to phone B, and press “Recall” or “Flash” and "3" to start 3-way chat. 3. Three-way conferencing hold & Switch calls: press “Recall” or “Flash”, after hearing dial tone, press "2".
Need help?
Do you have a question about the 3G10WVT and is the answer not in the manual?
Questions and answers