Axis P1343 User Manual page 22

Viewer Settings
Check the Show viewer toolbar box to display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the video
image in your browser.
The administrator can disable the installation of the H.264 decoder included with AXIS Media Control. This is used to prevent
the installation of unlicensed copies. Further decoder licenses can be purchased from your Axis dealer.
Enable Show crosshair in PTZ joystick mode and a cross will indicate the center of the image in PTZ joystick mode.
Check Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control
panel.
Check Enable recording button to enable recording from the Live View page. The recordings are saved to the location
specified in the AMC Control Panel, see AXIS Media Control (AMC), on page 13.
Action Buttons
Check the boxes to display the action buttons on the Live View page.
The manual trigger button can be used to manually trigger and stop an event. See Events, on page 23.
The snapshot button can be used to save a snapshot from the video stream. This button is mainly intended for use with
browsers other than Internet Explorer, or when not using AXIS Media Control to view the video stream. AXIS Media Control for
Internet Explorer has its own snapshot button.
User Defined Links
User-defined links can link to web pages, or
can be used to run scripts or activate and
control external devices connected to the
network camera. Once configured, the links
appear on the Live View page.
To set up a link, check the Show custom link
box, select the cgi or web link radio button,
enter the URL and a descriptive name in the
provided field.
A link defined as a web link will open in a
new window, while a cgi link will run for
example a script in the background.
User-defined cgi links can be used to issue
API requests. For more information on the
VAPIX Application Programming Interface
(API), see the Video developer pages at Axis
Web site www.axis.com/developer
Output Buttons
The output buttons are used to manually activate and inactivate the output port, for example, to switch a light on and off. To
display the output buttons on the Live View page, select the type of control to use for the port from the drop-down list:
Pulse – Activates the output for a defined period of time
•
Active/Inactive – Displays two buttons, one for each action (on/off)
•
See also I/O Ports, on page 38.
AXIS P1343/-E/AXIS P1344/-E - Live View Config
User-defined link
22