Xantrex XPower 3000 Owner's Manual page 15

975-0555-01-01
Feature Description
4 Reset button
Use to reset the 20 A supplementary (overcurrent) protectors.
5 Power light (green)
Indicates the inverter is operating.
6 Remote O
For connecting the Remote O
7 Fault light (red)
Indicates that the inverter has shut down due to inverter overload or
over-temperature.
8 O /O Switch
N FF
Turns the inverter's control circuit on and off. This switch is not a
power disconnect switch. Disconnect AC and DC power before
working on any circuits connected to the inverter.
/O Connector Port
N FF
/O
N
Switch.
FF
2–3