Table of Contents
Advertisement
Cadi.Sense
User Manual
IP Address (LAN Configuration)
This page allows you to change the IP address of SmartNode.
NOTE: You may change the IP address of SmartNode to an IP address within the same
subnet of your existing network. This will allow you access SmartNode webpages even after it
is associated to your WiFi router/AP. Just remember to reserve the assigned IP address on
your router's DHCP server to prevent any IP conflict on your network.
Settings Backup (Configuration Settings)
This page allows you to backup and restore the current device configuration as well as to
reset the device to its factory default settings.
Backup – To backup the current configuration of the device to a file
Update – To restore a configuration file to the device
Restore – To reset the device to factory default settings
Firmware Upgrade
Firmware menu allows you to see the current firmware version and build date as well as
upgrade the firmware of the device.
Firmware Information – Shows the current firmware's version and build date
Firmware Upgrade
– Load a new firmware upgrade file to the device
NOTE:
Make sure you connect to the device via Ethernet cable when upgrading the
firmware to avoid corruption during the firmware upgrade procedure.
T-S1-800.900-I10-B01
34
Advertisement
Table of Contents
