Advanced Features; How To Change Smartnode Password; Resetting Smartnode - Cadi.Sense Wireless Thermometer User Manual

4.

Advanced Features

4.1

How to Change SmartNode Password

Step 1:
Go to your device's web browser and enter the LAN URL (please refer to Section 2.2 Step
2). Click the "Advanced Settings" icon, then "MENU", "More WiFi Settings – Security".
Change the password shown in "WPA Passphrase". Then click "Apply".
Note: After changing the SmartNode's Password, your WiFi connection with SmartNode
will be disconnected. You have to reconnect to your SmartNode using its SSID (please
refer to Section 2.1) and your new password.
4.2

Resetting SmartNode

Warning: All data will be deleted after this hardware reset. So before resetting, you may
want to export the data using the "Export Temperature History Data" icon that will be
available only in laptop's web browser.
Step 1:
Make sure SmartNode is switched on for at least 1 minute. Take a paperclip and bend
the tip outwards. Use the tip to press down and hold for 10 seconds the small round
"hole" situated just next to the LAN socket on the SmartNode.
SmartNode will reset and reboot in 1 minute.
Note: Resetting SmartNode will restore all settings and configuration to the factory
defaults, except that:
•
Upgraded firmware will stay and not revert back to the older version;
• Pre-registered sensor will be deleted. So you need to manually add sensor after
performing this hardware reset.
T-S1-800.900-I10-B01
Cadi.Sense
User Manual
Then release it and
18