Table of Contents
Advertisement
Step 4: Remove the rectangular backing liner.
Step 5:
Paste the ThermoSensor by sticking the adhesive part to the inside of the
diaper/undergarment, so that the sensor' s metal part will touch the lower abdomen (left or
right) when the diaper/undergarment is properly worn (as shown in the picture).
Note (a): Please note that the ThermoSensor may take about 10 minutes to warm up
from room temperature to the body temperature. A temperature reading is wirelessly
sent every 30 seconds to your SmartNode, and this temperature reading will appear on
the Cadi.Sense application.
Note (b):
To remove the sensor after usage, first peel off the Stick-On from the
diaper/undergarment, then remove the sticky residue from the sensor.
T-S1-800.900-I10-B01
Cadi.Sense
User Manual
16
Advertisement
Table of Contents
