Installation - Robertshaw 9600 User Manual

Installing Item 9600 Thermostat
NOTE: F
OR NEW INSTALLATIONS
ABOVE THE FLOOR
IN DIRECT SUNLIGHT
AT THESE PLACES WILL AFFECT THERMOSTAT OPERATION
1. Turn power off to the heating and cooling systems.
2. Place COOL-OFF-HEAT In OFF position.
PROG
MAN
SET PROG/MAN
3. Place
Into AUTO position.
4. Remove the cover using a coin
or screwdriver.
5. Place thermostat against the wall at desired location. Make sure
wires will feed through opening on base of thermostat.
6. Mark placement of mounting holes. See Fig. 3. Set base aside.
,
. D
O NOT INSTALL BEHIND A DOOR
,
OR NEAR ANY HEAT OR STEAM GENERATING FIXTURES
COOL-OFF-HEAT AUTO - ON
AUTO–ON switch
Figure 1
MOUNT THERMOSTAT ON INSIDE WALL
Figure 2
3
, ,
IN A CORNER NEAR AIR VENTS
.
COOL-OFF-HEAT
AUTO - ON
, 4-5
FEET
,
. I
NSTALLATION