Call; Security - Zte Memo User Manual

• Service Area: To set phone to
sound a tone when the phone is
Service area.
2. Select "On" or "Off".
3. Press the OK Key to save the
setting.
Tone length
1. Press the Left Soft Key Menu >
Settings > Sounds > Tone Length.
2. Select "Short" or "Long".
3. Press the OK Key to save the
setting.

Call

1. Press the Left Soft Key Menu >
Settings > Call
Contacts match
This function will match your
abbreviated dialed number with an
entry from your phone's contact list.
After dialing 7 digits, the phone will
display contacts with the same
sequence of numbers. Use the up/
down Navigation Key to scroll to the
desired contact.
Settings
40
1. Select "On" or "Off".
2. Press the OK Key to save the
setting.
Call answer
To select an answer mode:
1. Select "Send Key" or "Any Key".
2. Press the OK Key to save the
setting.
Auto retry
Automatically redials a call up to 5
times after a set time interval.
1. Select "On" or "Off".
2. Press the OK Key to save the
setting.
TTY mode
Your phone is able to operate with a
TTY (Teletypewriter) device in digital
modes. This feature is system
dependent and may not be available
in all areas.
1. Select "TTY Full", "TTY + Talk",
"TTY + Hear" or "TTY Off".
2. Press the OK Key to save the
setting.
Press the Left Soft Key Info.
note
Missed Call Alert
To select an answer mode:
1. Select "On" or "Off".
2. Press the OK Key to save the
setting.
Speed Dial
To select an speed dial mode:
1. Select "On" or "Off".
2. Press the OK Key to save the
setting.

Security

Prevents unauthorized use of
your phone. The following can be
restricted:
Phone lock
Prevents the phone from being used
without entering the password first.
1. Press the Left Soft Key Menu >
Settings > Security > Enter your
password. > Phone Lock.
The default Lock code is the last
note
4 digits of your phone number.
2. Select "Lock Now", "Unlock" or "On
Power Up".
3. Press the OK Key to save the
setting.
Change lock code
Changes your 4-digit password.
1. Press the Left Soft Key Menu >
Settings > Security > Enter your
password. > Change Lock Code.
The default Lock code is the last
note
4 digits of your phone number.
2. Enter your lock code.
3. "Create your new lock code"
screen appears. Enter your new
lock code.
4. "Re-enter your new lock code"
screen appears. Enter your new
lock code again.
Settings
41