Emergency Calls; Certification Information (Sar) - Zte Memo User Manual

operations are in progress. Areas
with a potentially explosive
atmosphere are often, but not always,
clearly marked. They include below
deck on boats, chemical transfer
or storage facilities and areas
where the air contains chemicals
or particles such as grain, dust, or
metal powders. You should check
with the manufacturers of vehicles
using liquefied petroleum gas (such
as propane or butane) to determine
if this device can be safely used in
their vicinity.

Emergency calls

Important: This device operates using
radio signals, wireless networks,
landline networks, and user-
programmed functions.
Connections in all conditions cannot
be guaranteed. You should never rely
solely on any wireless device for
essential communications like
medical emergencies.
Additional safety information
54
To make an emergency call:
1. If the device is not on, switch it on.
Check for adequate signal strength.
Depending on your device, you may
also need to complete the following:
• Remove certain call restrictions
you have activated in your
device.
2. Press the END Key as many times
as needed to clear the display and
ready the device for calls.
3. Enter the official emergency
number for your present location.
Emergency numbers vary by
location.
4. Press the SEND Key.
When making an emergency call,
give all the necessary information as
accurately as possible. Your wireless
device may be the only means of
communication at the scene of an
accident. Do not end the call until
given permission to do so.

Certification information (SAR)

This mobile device meets guidelines
for exposure to radio waves.
Your mobile device is a radio
transmitter and receiver. It is
designed not to exceed the limits for
exposure to radio waves
recommended by international
guidelines. These guidelines were
developed by the independent
scientific organization ICNIRP and
include safety margins designed to
assure the protection of all persons,
regardless of age and health.
The exposure guidelines for mobile
devices employ a unit of
measurement known as the Specific
Absorption Rate or SAR. The SAR
limit stated in the ICNIRP guidelines
is 1.6 watts/kilogram (W/kg) averaged
over 1 grams of tissue. Tests for
SAR are conducted using standard
operating positions with the device
transmitting at its highest certified
power level in all tested frequency
bands. The actual SAR level of an
operating device can be below the
maximum value because the device
is designed to use only the power
required to reach the network. That
amount changes depending on a
number of factors such as how close
you are to a network base station.
Use of device accessories and
enhancements may result in different
SAR values. SAR values may vary
depending on national reporting and
testing requirements and the network
band.
Your mobile device is also designed
to meet the requirements for
exposure to radio waves established
by the Federal Communications
Commission (USA) and Industry
Canada. These requirements set a
SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR
value reported under this standard
during product certification for use at
the ear is 1.4 W/Kg and when properly
worn on the body is 0.649 W/Kg.
Additional safety information
55