Dell Precision Workstation 690 User Manual page 69

1 floppy drive
2 floppy drive carrier
8. Attach the power and data cables to the floppy drive.
9. Connect the other end of the data cable to the system board connector labeled "DSKT." To locate the system board connector, see
Components.
1 power cable
2 data cable
3 floppy-drive connector (DSKT)
10. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
11. Reinstall the drive panel (see
12. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
13. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
Replacing the Drive Panel).
Replacing the Computer Cover).
System Board