Dell Precision Workstation 690 User Manual page 39

1 bracket inside of slot
2 bracket caught outside of slot
3 fully seated card
4 not fully seated card
NOTICE: Do not route card cables behind the cards. Cables routed behind the cards could cause damage to the equipment.
10. Connect any cables that should be attached to the card.
See the documentation for the card for information about the card's cable connections.
11. Rotate the card retainer back into its original position; push its tip so that its tab clicks into place.
1 release tab
2 card retainer
12. Press the card retention device back into its original position; push it down until it clicks into place.