Timer; Timed Cooking And Power Level - Maytag MMV5100AA User Manual

TIMER

You can set and use the Timer function independently, or while a cooking
program is in progress. The Timer will be displayed on the lower line of
the display. Timer can be set from 0 to 99 minutes 99 seconds.
Example: To set timer for 3 minutes:
Step Procedure
Press Timer .
1
Press 3, 0 and 0
2
Press START.
3
The timer starts counting and oven will
beep for 7 seconds when time is up.
Note: • To clear a Timer setting, press
Timer and cooking, press Timer. Timer on the lower line of the
display flashes for 5 seconds. Press STOP/CLEAR while Timer on
the lower line of display flashes. The Timer will stop but the oven
continues cooking to the end.
To stop beeps of Timer, touch Timer.
•
• Timer will not beep if the oven beeps at the same time to indicate
another oven operation (the end of a cooking, for example).
If you do not enter a time for 10 seconds after step 1, the setting
•
is cleared with a beep.
• If cooking completes while you are setting the Timer, all settings
are cleared. Restart from step 1.
• If no key is touched for 5 seconds after the last key entry at step 2
above, the timer automatically starts.

TIMED COOKING AND POWER LEVEL

This basic microwave cooking method allows you to cook food for a
desired time. The oven can be programmed up to 99 minutes 99 seconds
of cooking. In addition to the
different microwave power from 10 levels,
level).
Multi-stage Cooking:
You can program the oven for up to 3 stages of cooking in sequence. Each
stage can be programmed with a different time setting and power level. To
program 2-stage or 3-stage cooking, go through steps 1-3 on page 15.
Steps 1-3 should be followed for each stage of cooking that is
programmed. After the time and power levels have been entered for all
stages, press S S TART. The oven will cook in accordance with the time and
power sequences that were entered.
Delay Start Cooking:
You can delay the time that you would like the cooking to start.
Cooking can be delayed up to 99 minutes and 99 seconds. To delay
cooking, follow procedure for multi-stage cooking, but for stage1
use power level P 0.
to set 3 minutes.
Stop/Clear
(maximum) power level, you can select
P100
P 0
14
Keypad
Timer
3
0
0
One Touch
START
. If you are using both
to P90 (0-90% of total power