Menu Operation - Optoma Projector Instructions Manual

Menu Operation

The projector has multilingual on-screen display menus that allow you to
make image adjustments and change a variety of settings.
How to operate
1. To open the OSD menu, press "Menu" on the Remote Control or
Projector Keypad.
2. When OSD is displayed, use
main menu. While making a selection on a particular page, press
"Enter key to enter sub menu.
3. Use / key to select the desired item and press
enter the Single-Item-Menu.
4. Use the
selection.
5. Select the next item to be adjusted in the sub menu and adjust as
described above.
6. Press "Menu" to go back to Sub-Menu.
7. To exit, press "Menu" again. The OSD menu will close and the projector
will automatically save the new settings.
Main Menu
Sub-Menu
Single-Item-
Menu
EN-26
/ key to adjust the value. Use "Enter" to confirm the
/ key to select to select any item in the
or
/ /"Enter" key to
Settings