Connecting Video Source Devices - Optoma Projector Instructions Manual

Connecting Video source devices

You can connect your projector to various Video source devices that provide
any one of the following output sockets:
HDMI
Component Video
S-Video
Video (composite)
You need only connect the projector to a Video source device using just one
of the above connecting methods, however each provides a different level of
video quality. The method you choose will most likely depend upon the avail-
ability of matching terminals on both the projector and the Video source
device as described below:
Terminal name Terminal appearance
HDMI
Component
Video
S-Video
Video
Note
Not all models have HDMI Input, please check your projector before connecting
EN-20
HDMI
VGA1/YPbPr or
VGA2/YPbPr
S-VIDEO
VIDEO
Reference
"Connecting an
HDMI source
device" on
page 21
"Connecting a
Component Video
source device" on
page 21
"Connecting an
S-Video source
device" on
page 22
"Connecting a
composite Video
source device" on
page 22
Picture quality
Best
Better
Good
Normal