True 3D Video Compatibility Table; Video Compatibility - Optoma Projector Instructions Manual

True 3D Video Compatibility table

Input Resolutions
If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode
1080i@25hz and 720p@50hz will run in 100hz; other 3D timing will run in 120hz

Video Compatibility

NTSC
PAL
SECAM
Component
SDTV
HDTV
HDMI 1.4a Input timing
3D Input
1280 X 720P @ 50Hz
1280 X 720P @ 60Hz
1280 X 720P @ 50Hz
1280 X 720P @ 60Hz
1920 X 1080i @50 Hz
1920 X 1080i @60 Hz
1920 X 1080P @24 Hz Top - and - Bottom
1920 X 1080P @24 Hz Frame packing
HDMI 1.3 1920 x 1080i @ 50Hz
1920 x1080i @ 60Hz
1280 x 720P @ 50Hz
1280 x 720P @60Hz
1920 x 1080i @ 50Hz
1920 x1080i @ 60Hz
1280 x 720P @ 50Hz
1280 x 720P @60Hz
480i
NTSC M/J, 3.58MHz, 4.43MHz
PAL B/D/G/H/I/M/N, 4.43MHz
SECAM B/D/G/K/K1/L, 4.25/4.4 MHz
480i/p, 576i/p, 720p(50/60Hz), 1080i(50/60Hz)
720p(50/60Hz), 1080i(50/60Hz), 1080P(50/60Hz)
1080P(24/50/60Hz)
480i/p, 576i/p
Top - and - Bottom
Top - and - Bottom
Frame packing
Frame packing
Side- by-Side (Half)
Side- by-Side (Half)
Side-by- SBS mode
Side(Half) is on
Top-and- TAB mode is
Bottom on
HQFS 3D format is
Frame
sequential
EN-47