Connecting A Composite Video Source Device - Optoma Projector Instructions Manual

Connecting an S-Video source device
Examine your Video source device to determine if it has an unused S-Video
output socket available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to an S-Video source device:
1. Take an S-Video cable and connect one end to the S-Video output socket
of the Video source device.
2. Connect the other end of the S-Video cable to the S-VIDEO socket on the
projector.
Important
If the selected video image is not displayed after the projector is turned on and the
correct video source has been selected, check that the Video source device is turned on
and operating correctly. Also check that the signal cables have been connected
correctly.
If you have already made a Component Video connection between the projector and this
S-Video source device using Component Video connections, you need not connect to
this device using an S-Video connection as this makes an unnecessary second
connection of poorer picture quality. See
for details.

Connecting a composite Video source device

Examine your Video source device to determine if it has a set of unused
composite Video output sockets available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to a composite Video source device:
1. Take a Video cable and connect one end to the composite Video output
socket of the Video source device.
2. Connect the other end of the Video cable to the VIDEO socket on the
projector.
Important
If the selected video image is not displayed after the projector is turned on and the
correct video source has been selected, check that the Video source device is turned on
and operating correctly. Also check that the signal cables have been connected
correctly.
You need only connect to this device using a composite Video connection if Component
Video and S-Video inputs are unavailable for use. See
devices" on page 20
EN-22
for details.
"Connecting Video source devices" on page 20
"Connecting Video source