Table of Contents
Advertisement
Figure 4: Camera adjustment
Platform horizontal adjustment
Focus adjustment
To adjust the camera zoom and focus, see Figure 6 and do the following:
1. Loosen the zoom ring thumbscrew.
2. Turn the zoom ring to set the desired zoom.
3. Tighten the zoom ring thumbscrew.
4. Loosen the focus ring thumbscrew.
5. Turn the focus ring to set the desired focus.
6. Tighten the focus ring thumbscrew.
Figure 5: Zoom and focus adjustment
Zoom ring thumbscrew for VA2 and focus ring for VA9 lens
Connect the monitor
Program the cameras by attaching a standard video monitor to the system.
To connect the monitor, do the following:
1. Plug the monitor output cable (Figure 2 on page 5) to the video monitor output
connector (Figure 1 on page 5).
8
Platform vertical adjustment
Rotor horizontal adjustment
Focus ring thumbscrew for VA2 and zooming ring for
VA9 lens
UVD-XP3DNR Camera User Manual
Advertisement
Table of Contents
