Footswitch Operation; Disconnecting The Footswitch - Chauvet 4BAR Flex User Manual

Footswitch
Operation
Disconnecting
the Footswitch
4BAR™ Flex User Manual (Rev. 4)
The included footswitch provides quick access to the preset colors, color change
programs, and triggering via the onboard microphone on the 4BAR™ Flex:
1. Power on the fixture.
2. Connect the footswitch to the 4BAR™ Flex via the 4-pin connection cable with plug.
3. Press pedal #1 (Preset) to activate control. When this is operating properly, the
LEDs on the 4BAR™ Flex will light white (first function on pedal #1).
Pedal Sub-option
1 x press
2 x press
3 x press
4 x press
5 x press
1
6 x press
(Preset)
7 x press
8 x press
9 x press
2
1 x press
(Sound On)
3
1 x press
(Blackout)
There is no need to modify any settings for the 4BAR™ Flex before connecting
the footswitch. It will operate properly in any mode.
Plug the master fixture in LAST!
In order to properly disconnect the footswitch, please follow these steps:
1. Unplug the footswitch from the 4BAR™ Flex.
2. Turn the power to the fixture off (unplug the power cable).
3. Turn the power to the fixture on again (plug in the power cable), and the fixture will
properly operate on any one of the three modes.
Function
White
Red
Green
Blue
Yellow
Magenta
Cyan
Color change every second in a
continuous loop
Color change every three seconds in a
continuous loop
Sound controlled
All LEDs off (blackout)
Page 13 of 16