How To Change Function Settings; Using The Direct Keys - Pentax K-50 Operating Manual

How to Change Function Settings

38
Function settings can be changed using the direct keys, control panel or
menus.
This section explains the basic ways to change function settings.
1

Using the Direct Keys

In standby mode, you can set Sensitivity, White Balance, Flash Mode and
Drive Mode by pressing the four-way controller (2345). (p.76)
Below, how to set [Flash Mode] is explained as an example.
1
Press the four-way controller (4)
in standby mode.
The Flash Mode setting screen appears.
2
Use the four-way controller (45)
to select a flash mode.
3
Press the 4 button.
The camera is ready to take a picture.
Auto Flash Discharge Auto Flash Discharge
0.0 0.0
Cancel Cancel
MENU
OK OK
OK