Pentax K-50 Operating Manual page 231

• When an Eye-Fi card is used, a new folder is created for every 100 images
saved.
• Auto Power Off does not function when images are being transferred.
• When transferring a large number of images, use the optional AC adapter kit
or install a fully charged battery. If the internal temperature of the camera
becomes high during transferring images, the camera may be turned off
automatically to protect the camera circuitry. In such a case, turn on the
camera again after a while, and data transfer will resume.
• Select [Communication Info] in Step 2 on p.228 to check the firmware version
of the Eye-Fi card.
Transferring Selected Images
When [SELECT] is set in Step 3 on p.228, only the selected images are
transferred.
1
Press the four-way controller (3) in the single image
display of playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select N (Eye-Fi
Image Transfer), and press the 4 button.
The screen to select the unit of transfer appears.
3
Use the four-way controller (23) to select the unit of
transfer, and press the 4 button.
Select image(s)
Select a folder
The folder selection screen appears.
Enables selecting individual images (in one folder, up to
100 images).
• For images taken with [File Format] set to [RAW+],
JPEG and RAW files saved are counted as one image,
and both files are transferred.
Transfers all of the images stored in the selected folder.
• Up to 100 images that can be transferred from the
selected folder are transferred.
229
7