Pentax K-50 Operating Manual page 156

154
• Corrections can only be made when using DA, DA L, D FA or some FA
lenses. The Lens Correction functions cannot be selected when an
incompatible lens is attached. (p.261)
• The Lens Correction functions are disabled when using an accessory such
as a close-up ring or rear converter that is attached between the camera and
the lens.
• The shooting speed for Continuous Shooting may be slower when using the
Distortion Correction function.
• The effects of the Lens Correction functions may be barely noticeable in
some cases due to the shooting conditions or other factors.
1
Press the M button in standby mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj], and press the 4
5
button.
The [Distortion Correction] or [Lat-Chromatic-Ab Adj] screen appears.
3
Use the four-way controller (45)
to select [Off] or [On].
4
Press the 4 button.
The camera returns to the control panel.
• When a compatible lens is attached and the file format is set to [RAW] or
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.199)
• You can also set [Distortion Correction] and [Lat-Chromatic-Ab Adj] in [Lens
Correction] of the [A Rec. Mode 2] menu.
Distortion Correction Distortion Correction
On On
Cancel Cancel
MENU
OK OK
OK