Pentax K-50 Operating Manual page 120

118
Correcting the Tilt of the Images
When an image is tilted, it can be corrected up to a maximum of ±1.0
degrees (when Shake Reduction is turned on).
1
Select [Horizon Correction] in the [A Rec. Mode 3] menu.
2
Use the four-way controller (45)
to select P (Off) or O (On).
4
3
Press the 3 button.
The screen that was displayed before selecting the menu item appears
again.
4
Aim the camera at the subject, and press the shutter
release button halfway.
When [Horizon Correction] is set to On by selecting the check box, the
following indicators appear on the status screen or Live View screen.
D
E
Shake Reduction On + Horizon Correction On
Shake Reduction Off + Horizon Correction On
1 2 3 4
High-ISO NR High-ISO NR
Slow Shutter Speed NR Slow Shutter Speed NR
Composition Adjust. Composition Adjust.
Electronic Level Electronic Level
Horizon Correction Horizon Correction
Shake Reduction Shake Reduction
Input Focal Length Input Focal Length
Exit Exit
MENU