Installing The Px-850A Internal Pata Drive; Px-850A Drive Features And Controls; Front Panel-Px-850A Internal Drive - Plextor PX-850A Installation And User Manual

PX-850A Internal PATA Drive
This section explains how to physically install your PX-850A internal
PATA drive in your computer.

PX-850A Drive Features and Controls

Before proceeding, become familiar with the controls and features of
your Plextor drive. Match the parts of your drive to the illustrations
below.
Front Panel—PX-850A Internal Drive
Figure 1: Front panel of the PX-850A internal PATA drive
• Tray front door: Attached to tray drawer.
• Emergency eject hole: If the automatic eject button does not work,
insert the emergency eject tool, paper clip, or other thin, rigid object
in this hole to eject tray. Turn OFF power before using this feature.
• Disc/busy indicator: Illuminated green for disc reading or writing.
• Eject button: Push once to eject tray. Push again to insert the tray
back into the PX-850A. To prevent wear on the drive, always use the
eject button to insert the tray.
2. Installing the
PX-850 Installation and Users Manual
9