Midi Latency Modes - American Audio VMS2 User Manual

14. MIDI L M
ATENCY ODES
There are two MIDI latency modes; Normal mode and Turbo mode. Normal mode has a MIDI
latency of 10 milliseconds, this is the default mode. Turbo mode has a MIDI latency of 1
millisecond.
To set the VMS2™ to Turbo mode, do as follows:
Before powering on, press and hold the Cue, Play, and Pause buttons on the left side.
Hold the buttons until the Channel Volume Level Indicators (13) light up with the code
version. Read more about the firmware version in chapter 12.1 Player Front (under 13 -
Channel Volume Level Indicators).
It is recommended that you use the default mode if your computer does not meet the
recommended system requirements or if you are using Windows Vista. It is also strongly
recommended that you close all programs running in the background; this will free up RAM
and minimize the CPU process. If you are using a laptop, turn off your wireless card if
possible, since this may cause sound problems. Allow your computer's hard drive to have at
least 20% free space.
©American Audio® - www.americanaudio.eu VMS2™ User Manual Page 28