Download Print this page

HP Integrity Superdome 16-socket Specification page 21

Integrity superdome servers
Hide thumbs Also See for Integrity Superdome 16-socket:

Advertisement

QuickSpecs
Configuration
General Site Preparation
General Site Preparation
AC Power Requirements
AC Power Requirements
General Site Preparation
General Site Preparation
AC Power Requirements
AC Power Requirements
Rules
Rules
Rules
Rules
The modular, N+1 power shelf assembly is called the Front End Power Subsystem (FEPS). The redundancy of the FEPS is
achieved with 6 internal Bulk Power Supplies (BPS), any five of which can support the load and performance requirements.
Input Options
Input Options
Input Options
Input Options
Reference the Site Preparation Guide for detailed power configuration options.
Input Power Options
Input Power Options
Input Power Options
Input Power Options
a. A dedicated branch is required for each PDCA installed.
b. Refer to the Option 006 Specifics Table
Option 006 Specifics
Option 006 Specifics
Option 006 Specifics
Option 006 Specifics
Insight Manager 7
Insight Manager 7
Insight Manager 7
Insight Manager 7 maximizes system uptime and provides powerful monitoring and control. Insight Manager 7
also provides inventory reporting capabilities that dramatically reduce the time and effort required to track server assets
and helps systems administrators make educated decisions about which system may required hardware upgrades or
replacement. And Insight Manager 7 is an effective tool for managing your HP desktops and notebooks as well as
non HP devices instrumented to SNMP or DMI.
The HP Enablement Kit for Linux facilitates setup and configuration of the operating system. This kit includes
The HP Enablement Kit for Linux
The HP Enablement Kit for Linux
The HP Enablement Kit for Linux
System Imager, an open source operating system deployment tool. System Imager is a golden image based tool and
can be used for initial deployment as well as updates.
Partition Manager
Partition Manager
Partition Manager
Partition Manager creates and manages nPartitions-hard partitions for high-end servers. Once the partitions are
created, the systems running on those partitions can be managed consistently with all the other tools integrated into
Servicecontrol Manager.
NOTE: At first release, Partition Manager will require an HP-UX 11i Version 2 partition or separate device (i.e.
NOTE:
NOTE:
NOTE:
Itanium2 based workstation or server running HP-UX 11i Version 2) in order to configure Red Hat or SUSE partitions.
Refer to HP UX section above for key features of Partition Manager.
HP's Management Processor enables remote server management over the Web regardless of the system state. In
HP's Management Processor
HP's Management Processor
HP's Management Processor
the unlikely event that the operating system is not running, the Management Processor can be accessed to power cycle
the server, view event logs and status logs, enable console redirection, and more. The Management Processor is
embedded into the server and does not take a PCI slot. And, because secure access to the Management Processor is
available through SSL encryption, customers can be confident that its powerful capabilities will be available only to
authorized administrators.
Support for Web Console that provides secure text mode access to the management processor
Reporting of error events from system firmware.
Ability to trigger the task of PCI OL* from the management processor.
NOTE:
NOTE:
NOTE:
NOTE: Online addition/replacement (OLAR) is not supported when running Red Hat or SUSE in the
partition.
Ability to scan a cell board while the system is running. (only available for partitionable systems)
Implementation of management processor commands for security across partitions so that partitions do not
modify system configuration. (only available for partitionable systems)
PDCA
PDCA
PDCA
PDCA
Source
Source
Source
Source
Source Voltage
Source Voltage
Source Voltage
Source Voltage
Product
Product
Product
Product
Type
Type
Type
Type
(nominal)
(nominal)
(nominal)
(nominal)
Number
Number
Number
Number
A5800A
3-phase
Voltage range 200-
Option 006
240 VAC, phase-to-
phase, 50/60 Hz
Option 006 Specifics Table
Option 006 Specifics Table
Option 006 Specifics Table for detailed specifics related to this option.
a
DA - 11717
North America — Version 15 — January 3, 2005
HP Integrity Superdome Servers: 16-socket, 32-
HP Integrity Superdome Servers: 16-socket, 32-
HP Integrity Superdome Servers: 16-socket, 32-
HP Integrity Superdome Servers: 16-socket, 32-
PDCA
PDCA
PDCA
PDCA
Input Current
Input Current
Input Current
Input Current
Required
Required
Required
Required
Per Phase
Per Phase
Per Phase
Per Phase
200-240 VAC
200-240 VAC
200-240 VAC
200-240 VAC
4-wire
44 A Maximum
per phase
socket, and 64-socket
socket, and 64-socket
socket, and 64-socket
socket, and 64-socket
Power Required
Power Required
Power Required
Power Required
2.5 meter UL power cord and OL
approved plug provided. The customer
must provide the mating in line connector
or purchase quantity one A6440A opt 401
to receive a mating in line connector. An
electrician must hardwire the in- line
connector to
a,b
60 A site power.
Page 21

Advertisement

loading