Warning Labels; Technical Data - Grindmaster 10 Operation And Instruction Manual

WARNING LABELS

The following warning labels were on your grinderbrewer when it shipped from the factory. They should remain
on your grinderbrewer in good, readable condition at all times. If one of your labels is missing or damaged,
order a replacement label immediately.
Part# 71104
Located on outside back, grinderbrewer casing
WARNING
• USE ONLY ON A CIRCUIT THAT IS PROPERLY
PROTECTED AND CAPABLE OF THE RATED LOAD.
• ELECTRICALLY GROUND THE CHASSIS
• DO NOT DEFORM PLUG OR CORD
• FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES
• WATER CONNECTIONS SHALL COMPLY WITH THE PLUMBING CODE OF
BOCA & THE FOOD SERVICE SANITATION MANUAL OF THE FDA
• DO NOT USE NEAR COMBUSTIBLES
• FAILURE TO COMPLY RISKS PERSONAL INJURY, DAMAGE TO
EQUIPMENT, FIRE OR SHOCK HAZARD
• READ THE ENTIRE OPERATING MANUAL INCLUDING THE LIMIT OF
WARRANTY AND LIABILITY BEFORE BUYING OR USING THIS PRODUCT
• ALWAYS UNPLUG UNIT FROM POWER SUPPLY BEFORE SERVICING
MODEL
PART #
VOLTAGE
FREQUENCY
WATTS
CIRCUIT BREAKER
NO. OF HOPPERS
HOPPER CAPACITY/HOPPER
BREW CAPACITY
NO. OF WARMERS
FEATURES :
GRIND'N BREW
GRIND ONLY
BREW ONLY
HALF BREW
PAINTED CASING
STAINLESS CASING
OUTLET FOR WARMERS
DIMENSIONS :
WIDTH (cm)
DEPTH (cm)
HEIGHT (cm)
WEIGHT (kg)
SHIPPING WEIGHT (kg)
* BASED ON 5" LEG HEIGHT
** INCLUDING WATER INLET FITTING
Grind 'n Brew Coffee Systems
Technical Data - Export Models
10HE
70929
230
50/60 Hz
3270
20
1
2,5 kg
1,9 L
x
x
x
x
x
23,5
61,6
*78,8
29 kg
36,3
Part # 61497
Located on front of grinderbrewer casing
OPGELET! HETE VLOEISTOFFEN EN OPPERVLAKKEN
11HE 20HE
70913 70931
230 230
50/60 Hz 50/60 Hz
3360 3270
20 20
1 2
2,5 kg 3 kg
1,9 L 1,9 L
1
x x
x x
x x
x x
x x
23,5 23,8
61,6 61,6
66,7 *95,25
29 kg 36 kg
36,3 43,1
21HE
70915
230
50/60 Hz
3360
20
2
3 kg
1,9 L
1
x
x
x
x
x
23,8
61,6
83,2
36 kg
43,1
Page 2