Table of Contents
Advertisement
Inserting and removing a digital storage card
To insert a digital storage card:
CAUTION:
a digital card.
1.
Hold the card label-side up, with the connectors facing the computer.
2.
Insert the card into the digital storage slot, and then press in on the card until it is firmly seated.
A sound indicates that the device has been detected.
To remove a digital storage card:
CAUTION:
procedure to safely remove the digital card.
1.
Save your information and close all programs associated with the digital card.
2.
From the Desktop, click the remove hardware icon in the notification area, at the far right of the
taskbar. Then, follow the on-screen instructions.
3.
Press in on the card (1), and then remove it from the slot (2).
NOTE:
If the card is not ejected, pull the card out of the slot.
Sharing data and drives and accessing software
When your computer is part of a network, you are not limited to using only the information that is
stored on your computer. Networked computers can exchange software and data with each other.
44
Chapter 7 Managing and sharing information
To reduce the risk of damage to the digital card connectors, use minimal force to insert
To reduce the risk of loss of data or an unresponsive system, use the following
Advertisement
Table of Contents
