Language Settings; Gps Settings - Mio Destinator User Manual

Settings

Language Settings

This screen lets you select the language for announcing travel prompts, street names and driving directions.
You can also select the type of voice, such as American, British, French, German, and so on.
- Language Settings

GPS Settings

Destinator uses the GPS receiver to pinpoint your location. GPS signals are automatically acquired and
your vehicle's location and position are constantly updated. The GPS may take a few minutes to find its
initial location. For best results, ensure that the GPS has a clear view of the sky.
Figure 33 - GPS Status
This screen displays the following GPS information:
Longitude - The angular distance east or west on the earth's surface, as measured in degrees from
the meridian of a particular point to the prime meridian of Greenwich, England.
Latitude - The angular distance, measured north of south from the equator, of a point on the earth's
surface.
Speed - The rate of movement, as expressed by kilometers or miles per hour.
Altitude - The height above sea level.
The green lines that appear on the satellite image represent the satellites that are sending GPS
signals to your receiver.
Mio Destinator User Manual 32