Traffic Information - Mio Destinator User Manual

Search for a Location
You can tap the Actions button from this screen to select from the following commands:
Add Road
Edit Road
Delete Road
Show on Map

Traffic Information

TMC messages are national and regional public radio FM transmissions that are used to inform drivers of
traffic, weather, and other driving conditions. TMC information is received by your TMC-enabled GPS
receiver and monitored by your software. Destinator can automatically reroute your travel to avoid areas
that TMC indicates are troublesome to drivers. For instance, if there is a storm or accident in your vicinity,
your route would be recalculated to avoid the problem. Please check whether your area supports TMC
broadcasts. A TMC receiver is required to receive TMC broadcasts.
From the Map, Look & Feel menu, select the Traffic Info button, which opens the TMC inbox, and
displays traffic reports. You can select a traffic report and click Next to show a map of the affected road. If
you click the Avoid button, Destinator recalculates your route.
The Radio Frequency bar, at the top of the TMC screen, displays the radio station frequency. You can tap
the Actions button to disable the TMC Auto-Search button, so that your TMC messages are from only one
station. If the TMC Auto-Search is disabled, you can click the same button to enable the TMC Auto-
Search, so that your messages appear from many stations.
You can use the following buttons to go to a different radio frequency:
Lets you search for a traffic channel at a lower frequency.
Lets you make minimal steps toward a lower frequency to bring in the channel
Lets you make minimal steps toward a higher frequency to bring in the channel
Lets you search for a traffic channel at a higher frequency
Channel Auto-Search
Tap the Actions button to show the Channel Auto-Search toggle button. When you tap this button,
Destinator automatically searches through the entire range of frequencies until a traffic channel is located
and continues to search for a traffic channel whenever the previous traffic channel frequency is lost.
Mio Destinator User Manual
Lets you select a road. An address screen appears for you to specify a city and
street. When you have completed updating your road information, tap Save.
Lets you rename the road and select a different group. When you have made your
changes, tap Save.
Select a road and tap this button to remove the road from your group.
Destinator no longer recognizes the removed entry as a road to avoid.
Lets you show the map with the displayed destination for you to review before
creating a route.
27