Avoid Road Locations - Mio Destinator User Manual

Search for a Location
Add Group
Edit Group
Delete Group
When selecting a group route, you can tap the Allow
exclude all roads located in the group.

Avoid Road Locations

When you tap Default or an Avoid Roads group, Destinator displays the group screen, which lets you
select roads to avoid. From this screen, you can use the Allow or Avoid buttons to include or exclude a
selected road when calculating a route.
1. Displays Roads
3. Enter Road Name
Figure 29 - Adding a Road to Avoid
Note: You cannot specify a particular toll road.
Mio Destinator User Manual
Create a new a group of roads to avoid. For example, you can create a group called
"San Francisco Roads", where you designate the roads in that area to be avoided.
When you tap the Add Group button, the Avoid Roads Group screen appears.
Enter the group name and tap Save.
Select a group and tap this button to change the group name. When you tap the
Edit Group button, the Avoid Roads Group screen appears displaying the group
name. Change the group name and tap Save. The new name is displayed on the
Avoid Roads screen.
Select a group and tap this button to remove the group from the Avoid Roads
screen. The road entries in this group are also removed.
2. Add Road
4. Show on Map
or Avoid button to include or
26