Alarm Recording - JVC SR-L911US Instructions Manual

7-4 Alarm Recording

Alarm recording functions during timelapse recording. When an alarm signal is input to the rear panel's ALARM IN terminal,
an index code is recorded on the tape and the VCR automatically switches to the 8H (EP) mode for realtime recording of the
alarm situation. Normal timelapse recording is restored after the preset alarm recording duration has passed.
* Alarm recording will not start from the Pause mode.
REC STOP/EJECT REC
CHECK
PAUSE/
REVERSE STILL PLAY SHIFT/TRACKING
MENU
FIELD
REW FF TIME SET/V.LOCK
ADVANCE
MODE
24H
• Set the alarm recording duration, buzzer ON/OFF during
alarm recording and the operation mode at the tape end
during alarm recording with the function menu switches.
(Menu switches for alarm/sensor recording mode setting)
Display "AL"
Extinguished
indication
Timelapse
Record mode
mode
Timelapse
recording
* An index code (VISS) is recorded at the start point of the alarm recording as an alarm cue signal.
• To record the index code (VISS), set the function menu switch <INDEX AL/SKIP> to "ALARM".
* During alarm recording, a +12 V signal is output from the rear panel's ALARM REC OUT terminal.
HIGH DENSITY
VIDEO CASSETTE RECORDER
COUNT/ AL/PL
CLOCK RESET
OPE. LOCK
OPERATE
RESET TIMER
/CANCEL REC ON
Lit
8H (EP)
mode
Alarm
recording
Alarm signal input
SR-L911US
SHUTTLE FIELD
FIELD
ADVANCE
REV FWD
SHUTTLE
/FIELD
SKIP/ALARM
SEARCH
5 During alarm recording, the AL indication is lit on the
display. After alarm recording is complete, the AL
indication blinks on the display to show that an alarm
signal has been input.
Blinking Lit
8H (EP)
Timelapse
mode
mode
Timelapse
Alarm
recording
recording
Alarm signal input
7 RECORDING
"AL" indication
AL
TIME MODE
Blinking
Timelapse
mode
Timelapse
recording
31