Table of Contents
Advertisement
5 Date and time setting commands
(1)
DATE SET (8EH)
(Example) Sep., 30, 2000
TXD
RXD
(2)
TIME SET (8FH)
(Example) 15 hours, 29 minutes, 59 seconds
TXD
RXD
5 Timer programming commands
(1)
PRG/CLK (62H)
(2)
SHIFT – (64H)
SHIFT + (63H)
(3)
SET – (66H)
SET + (65H)
(4)
CANCEL (67H)
Setting procedure is the same as when using the VCR controls. Be sure to transmit commands 1 byte at a time with "ACK" (0AH)
confirmation from the VCR after each transmission.
5 On-screen setting command
(1)
ON SCREEN ON (70H)
ON SCREEN OFF (71H)
Setting procedure for the following command (2) is the same as when using the VCR controls. Be sure to transmit commands 1 byte at a
time with "ACK" (0AH) confirmation from the VCR after each transmission.
(2)
ON SCREEN SELECT (74H)
5 Other commands
(1)
AL/PL RESET (E1H)
(2)
COUNT RESET (E2H)
10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD
: Set the current date (month, day, year) for the VCR. After this command (8EH) is sent, input 1-
byte numerical data (30H — 39H).
8EH
30H
39H
0AH
0AH
0AH
Month
: Set the current time (hour, minute, second) for the VCR.
After this command (8FH) is sent, input 1-byte numerical data (30H — 39H).
8FH
31H
35H
0AH
0AH
0AH
Hour
: Engages timer programming mode.
: Selects setting items. (–)
: Selects setting items. (+)
: Sets data selected with SHIFT.
: Sets data selected with SHIFT.
: Cancels program data in timer programming or engages the Cancel Program mode.
: Activates time/date on-screen indication.
: Deactivates on-screen indication.
: Changes the time display position on screen.
: When transmitted during alarm recording, the recording mode switches back to the previous mode.
The VCR's "AL" indication goes off. Transmit again after "AL" indicator goes off to reset the alarm/
power loss memory.
: Resets the tape counter to "0000".
33H
30H
30H
0AH
0AH
0AH
Day
Year
32H
39H
35H
0AH
0AH
0AH
Minute
Second
30H
Time
0AH
39H
Time
0AH
49
Advertisement
Table of Contents
