Table of Contents
Advertisement
4-2 Main Menu Display
You can display date and time data recorded when an alarm input or power failure occurs, as well as the hour meter (drum
rotating time) by selecting the desired item in the main menu.
The timer recording program setting screen, function menu switch setting screen, and date/time setting screen can also be
displayed by selecting the desired item in the main menu.
[SHIFT +/–] buttons
[MENU] button
REC
REC
STOP/EJECT
CHECK
PAUSE/
REVERSE
STILL
PLAY
SHIFT/TRACKING
MENU
FIELD
REW
FF
TIME
SET/V.LOCK
ADVANCE
MODE
24H
[SET +/–] buttons
Main menu screen
MAIN MENU
PROGRAM TIMER
FUNCTION
ALARM IN
POWER LOSS
HOUR METER
CLOCK ADJUST
PRESS (SHIFT, SET)
PRESS (MENU)
● PROGRAM TIMER:
Displays the program setting screen for timer recording.
* Timer programming is not possible if the date and
time are not set. In this case, the date/time setting
screen will be displayed.
● FUNCTION:
Displays the function menu setting screen.
● ALARM IN:
Displays the date and time when an alarm signal was
input.
● POWER LOSS
Displays the date and time when a power failure
occurred.
● HOUR METER:
Displays the hour meter (drum rotating time).
● CLOCK ADJUST:
Displays the date/time setting screen.
* Set the date and time before using this unit.
HIGH DENSITY
VIDEO CASSETTE RECORDER
TO
END
4 MONITOR ON-SCREEN DISPLAY
Operation
5
Connect the VCR's video output connector to the
monitor's video input connector.
Turn on the VCR and the monitor. Make sure the Stop
1
mode is engaged.
Press the [MENU] button.
2
[
The main menu screen is displayed.
Press the [SHIFT +/-] button to move the cursor arrow to
3
the item you want to display.
• Press the [SHIFT +] button to move the cursor arrow
down. Press the [SHIFT -] button to move it up.
Press the [SET +] or [SET -] button to display the
4
selected item.
To end menu operation and restore the normal screen,
5
press the [MENU] button.
•
When the [MENU] button is pressed during playback,
the monitor screen display switches from the playback
picture to the input video signal (EE picture) and the
main menu is shown on the screen.
This means that even during playback you can check
menu contents. Press the [MENU] button again to
restore the playback picture.
15
Advertisement
Table of Contents
