Technical Specification - Vax X-003 Instruction Manual

Bagless upright vacuum cleaner
Table of Contents

Advertisement

X-003 D2.1.qxd
9/9/05
Troubleshooting/UK Service & Help/Technical Specification
PROBLEM: Brushbar does not turn
Cause: Broken belt.
Solution: Replace belt.
Cause: Belt installed incorrectly.
Solution: Check belt.
PROBLEM: Air flow restricted with attachment use
Cause: Attachment use restricts air flow.
Solution: Check attachment.
Cause: New carpet debris clogging air path.
Solution: Remove obstruction.
10. UK Service & Help
Vax Care 0870 6061248
Monday-Friday 9.00am to 5.00pm.
An answerphone is available outside of these hours.
Any queries or concerns about using the Vax, call the
Vax Careline. Calls are charged at the UK national
rate. Please make a note of the serial number and
model number of the carpet cleaner before calling.
There are over 400 approved Vax Service Agents in
the UK. For the nearest Service Agent, please call the
Vax Careline.
www.vax.co.uk
10
11:14 AM
Page 10

11. Technical Specification

Power supply:
220-240V ~50Hz
Motor power:
1200W-1600W
dependant on model
Dirt container:
2.9 litres
Filter system:
Pleated paper HEPA filter
Pre-motor
Cord length:
7.4m
Weight:
6.4kg
Subject to technical change without notice.

Advertisement

Table of Contents
loading

This manual is also suitable for:

X-003tX-003b

Table of Contents