Programming Additional Transmitters; Transmitter Battery Replacement - Jeep 2014 Compass Owner's Manual

Hide thumbs Also See for 2014 Compass:
Table of Contents

Advertisement

NOTE: When you turn off the Panic Alarm by pressing
the PANIC button a second time, you may have to move
closer to the vehicle due to the radio frequency noises of
the system.

Programming Additional Transmitters

Refer to Sentry Key® "Customer Key Programming".
If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

Transmitter Battery Replacement

NOTE: Perchlorate Material – special handling may ap-
ply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
The recommended replacement battery is CR2032.
1. If the RKE transmitter is equipped with a screw,
remove the screw. With the RKE transmitter buttons
facing down, use a flat blade screwdriver to pry the
two halves of the RKE transmitter apart. Make sure
not to damage the elastomer seal during removal.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25
Separating Case Halves
2. Remove and replace the battery. Avoid touching the
new battery with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it
with rubbing alcohol.
3. To reassemble the RKE transmitter case, snap the two
halves together.
2

Advertisement

Table of Contents
loading

Table of Contents