13.Assembling the Rear Wheels for Propulsion Manual
13.1.Assembling the Manual Rear Wheels
• Remove the hand control box and the motorised wheels.
• Push in the quick dismantling axle button (A) and introduce
the axle (A) into the bearing support (B) of the mounting plate.
(photos 36 and 37).
Verify that the stop balls (C) protrude from their housing.
Clean the quick dismantling axle (A) as well as the bearing
support (B) of the castor wheel before assembling them. Dirty
components lead to premature wearing of the bearings.
Carefully check the manual brake adjustments according
to the 22/24" rear wheel type mounted on the wheelchair (see
paragraph 4.5.1).
B
A
36
B
A
C
37
13.2. Dismantling the Manual Rear Wheels
• Push in the quick dismantling axle button (A) and remove the
axle from the wheel bearing supports (B) of the mounting plate.
14. General Care and Maintenance
14.1. Cleaning the Wheelchair
Follow the following points for cleaning the wheelchair:
• Clean the hand control box and the seat and backrest covers
only with a damp cloth and a gentle cleaning product.
• Only use cleaning products which do not contain abrasives.
• Do not direct streams of water directly onto the electronic
components.
• Do not use a high pressure cleaner.
21