Equipment; Motor Drive Unit; Mounting Plate - Invacare esprit action4 NG User Manual

!
The belt fixation must be conform to the scheme enclosed
with each belt delivery; the belt should be mounted and adjusted
by your regular dealer.
Please be careful that the belts don't get caught in the spokes of
the rear wheel.The postural belts must not be used as safety belts
in a car.
• Anti-tipping castor wheels with foot rest (photo 24 and figure
25) :
This version includes a support for helping to tilt.
Adjust to the desired height (while respecting the recommended
distance) by operating the button (A figure 25).
!
The recommended distance between the castor wheels and
the floor is 3-5 centimeters, this adjustment is necessary in relation
to the rear wheel position and diameter.
Operate the button (A figure 25) and adjust the desired distance
using the preset adjustment holes.
A
24
A
3 cm mini
25
!
Ensure that the stud is well positioned in the preset adjustment
hole to avoid any risk of falling.
Never forget to fold the anti-tipping castor wheels once they are
retracted.

5. Equipment

5.1. Motor Drive Unit (photo 26)
The electric drive unit of the Esprit Action
following components:
• 2 x 12" or 22/24" motorised wheels (A)
• electronic center (B)
• the battery packs (C)
5.2. Mounting Plate (photo 27)
The mounting plates to the right and left of the wheelchair frame
are equipped with two housings (A) for the rear wheel axle and (B)
for the electrical connection which allow fitting of the 2 motorised
wheels.
A
B
26
C
4
NG includes the
C
A
B
27
15