Settings; Seat - Invacare esprit action4 NG User Manual

4. Settings

4.1. Seat

4.1.1. Seat fittings
- Standard seats:
• Nylon seat fabric with or without Velcro: the Velcro strips are
necessary for properly holding the cushion in place, ensure that it
is correctly placed on the seat.
The standard seats are not adjustable; if they become loose,
you should ask their replacement from your Distributor. Invacare
offers a range of seat cushions adapted to your needs, please
consult your Distributor.
6
!
Always use a fabric equipped with Velcro strips with a
cushion, this is to avoid any slippage and risk of falling!
B
3
4.1.2.Types of backrests
- Mid-height folding backrest (photo 3): in order to reduce the
volume during transport, activate the lever (B) by pulling or pushing
on it and fold the top part of the backrest.
To return to the initial position, bring back the top part to a
vertical position, it will snap back into place automatically.
!
Always check that the backrest is correctly locked into
position before the user gets in the chair in order to avoid any risk
of injury!
- 0°-30° Reclining backrests with standard 30/41/43 cm and 47/49/
51 cm heights.
They are now equipped with a new trigger handling system.
The reclining angle is easily adjustable, allowing an always
comfortable resting position.
Pull on the triggers (A) simultaneously to ensure the same angle on
the two sides and release the triggers at the chosen angle (Photo
4A).
A
4A