Using The Options Key; Improving Copy Quality - Brother DCP-7030 User Manual

Using the Options key

Use the Options key to quickly set the following copy settings temporarily for the next copy.
Press

Improving copy quality

You can choose from a range of quality
settings. The default setting is Auto.
Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
Text
Suitable for documents containing only
text.
Photo
Suitable for copying photographs.
Menu selections
Press a or b, then press OK
Quality
(DCP-7040 and DCP-7045N)
Stack/Sort
(appears when the document
is in the ADF)
Page Layout
The factory settings are shown in Bold with an asterisk.
4
Options
Press a or b, then press OK
Auto*
Photo
Text
Stack*
Sort
Off(1 in 1)*
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
To temporarily change the quality setting,
follow the steps below:
a
Load your document.
b
Enter the number of copies you want.
c
Press Options.
Press a or b to choose Quality.
Press OK.
d
Press a or b to choose Auto, Photo or
Text.
Press OK.
e
Press Start.
Making copies
4
Page
4
25
26
26
25