Troubleshooting; Caution - Invacare leo User Manual

Hide thumbs Also See for leo:
Table of Contents

Advertisement

9.3.5

TROUBLESHOOTING

1. If the POWER LED is off:
Check that the input voltage (115V/230V) is correct and that the charging cable is correctly
connected.
If the LED still does not light, please contact your dealer.
2. If the CHARGING LED is off:
Check that the charging cable is correctly connected.
If the battery is fully charged, the charger will switch to trickle charge mode and the CHARGING LED
light goes out.
If the charging process was not started (orange LED), the battery could be faulty. Please contact
your dealer.
3. If the CHARGING LED does not change from orange to green:
The battery cannot be charged correctly. It may be faulty. Please contact your Invacare dealer.
4. If the CHARGING LED changes from orange to green immediately:
The battery is either fully charged or faulty. Please contact your dealer.
9.3.6

CAUTION

• In order to extend the service life of the charger, you should not leave the electric vehicle connected to it
for prolonged periods.
• Do not use the charger for totally discharged batteries or when the batteries are faulty.
• Use the charger in a well ventilated room.
• Only use the charger for gel or AGM batteries (13-60 Ah).
• Do not use for a voltage input other than that specified. Make sure that the voltage input (115V or 230V)
is correctly set.
66

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents