Replacing Tail Lamp/Turn/Backup Lamp Bulbs; Replacing Brake/Tail/Backup Lamp Bulbs — Chassis Or Cutaway Cab - Ford Econoline Owner's Manual

Lights

Replacing tail lamp/turn/backup lamp bulbs

1. Turn the headlamp switch to the
OFF position and then remove the
four screws and the lamp assembly
from vehicle.
2. Rotate bulb socket
counterclockwise and remove from
lamp assembly.
3. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
To install the lamp, follow the removal procedures in reverse order.
Replacing brake/tail/backup lamp bulbs — Chassis or cutaway cab
(if equipped)
1. Make sure the headlamp switch is
in the OFF position.
2. Remove the four screws and the
lens from the lamp assembly.
3. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
To install the lamp, follow the removal procedures in reverse order.
57
2004 Econoline (eco)
Owners Guide (post-2002-fmt)
USA English (fus)