Features For Model Rdz60 - Rangemaster RWS38 Installation, Operation And Maintenance Instructions

Independent Storage Compartments
Both compartments can be set for either temperature range,
red or white, but for a more efficient energy usage and func-
tionality of the unit, it is better to use the top compartment
for reds (warmer) and the bottom compartment for whites
(cooler).
Insert Wine Bottles
The five (5) upper shelves each hold eight (8) bottles in a
front to back fashion. See Figures 12 and 13 for typical
wine bottle spacing. The bottom shelf holds four (4) bottles
in a side to side fashion.
Roll-out Racks
The top five (5) roll-out wine racks may be pulled out ap-
proximately 355 mm to facilitate adding or removing bottles
and the bottom shelf may be pulled out approximately 196
mm. Do NOT lean on or press down heavily on the wine
shelves. Doing so may damage the shelves and the wine
bottles stored on them. Pull the wine racks out gently and
carefully to minimize unsettling your wine collection. AVOID
pulling out more than one rack at any time to maintain
stability.
Single Bottle Racks
Since bottles are not stacked on top of each other, you can
easily view and access your inventory without disturbing
other bottles (see Figure 13).
Vibration Neutralization System
The Vibration Neutralization System (VNS) is a unique three-
layer design that protects your wine from damaging vibra-
tion without sacrificing cabinet capacity.
1. The compressor is isolated from the wine storage cavity,
virtually eliminating the transfer of vibration.
2. Vibration isolating mounts on the compressor offer a
second layer of protection from vibration transfer.
3. A vibration dampening mat inserted onto each shelf
absorbs any stray vibrations.

FEATURES FOR MODEL RDZ60

Front Bottles (Necks Facing Rear)
Rear Bottles (Necks Facing Front)
Figure 11
Figure 12
Figure 13
12