Aligning The Door - Rangemaster RWS38 Installation, Operation And Maintenance Instructions

CARE AND CLEANING
Door alignment
The door should be parallel to the sides and top of the
refrigerator. If alignment is necessary the door may be
adjusted by loosening the 2 screws which secure the hinge
adapter brackets to the door and adjusting the door side to
side. Use a 5/32" hex key for this procedure. (See Figure 15
below).
Hinge adapter screws loos-
en these to adjust door, on
the top and bottom of the
door.
Figure 15
NOTE
NOTE: For door closer to work properly it is necessary
to maintain a minimum space of 7.1mm between door
and cabinet flange as shown. This space can be ad-
justed by adjusting the top and bottom hinge adapter.
15
Remove the top
hinge pin to re-
move the door.
7.1mm
minimum
Door must be
parallel to top
and sides of
refrigerator.