Easy Replacement Of Handset - Mitel 5607 User Manual

Mitel 5607 Wireless Handset User Guide
Replace the Battery
If the standby time for the handset becomes too low you must replace the battery with a new
one. Contact your system administrator or your supplier to obtain new batteries.
Attach the battery as described in the following illustration. You attach the battery inside the
battery lid. It is connected it to the handset in such a way that "no miss-contact" is possible.
Figure 12: Easy Replaceable Battery - Unlock the Lid and Remove the Battery

Easy Replacement of Handset

Easy replacement can be used if a handset needs to be replaced. The easy replacement
procedure is done via the handset display and the 5607 Programmer, or the rack charger.
The following settings are replaced during easy replacement:
• DECT registration
• User options (including User ID)
• Contacts
• The extension number is assigned to the new handset
The following settings are not replaced during the easy replacement:
• Call list
• Messages
• Bluetooth pairing list
1
• License(s)
1. A license (that includes the handset variant and/or license dependent features) can be moved to another handset using
PDM/WSM.
76