Replacing Consumables; Replacing The Remote Control Batteries - Epson EH-TW420 User Manual

Replacing Consumables

This section explains how to replace the remote control batteries, the
lamp, and the air filter.

Replacing the Remote Control Batteries

If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two spare AA-size alkaline or manganese dry batteries
ready to use. You can only use AA-size alkaline or manganese dry
batteries.
Attention
Make sure you read the Safety Instructions/Support and Service
Guide before handling the batteries.
Procedure
A
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
Catch
s Safety Instructions
B
Replace the old batteries with new batteries.
Caution
Check the positions of the (+) and (-) marks inside the battery
holder to ensure the batteries are inserted the correct way.
C
Replace the battery cover.
Press the battery cover until it clicks into place.
57