Replacing The Air Filter; Resetting The Lamp Operating Time; Air Filter Replacement Period; How To Replace The Air Filter - Epson EH-TW420 User Manual

Replacing Consumables
F
Replace the lamp cover.
Attention
• Make sure you install the lamp securely. If the lamp cover is
removed, the lamp turns off automatically as a safety precaution.
If the lamp or the lamp cover is not installed correctly, the lamp
does not turn on.
• This product includes a lamp component that contains mercury
(Hg). Please consult your local regulations regarding disposal or
recycling. Do not dispose of it with normal waste.

Resetting the lamp operating time

f
The projector records how long the lamp is turned on and a message and
indicator notify you when it is time to replace the lamp. After replacing
the lamp, make sure you reset the lamp hours in the configuration menu.
p.38
s
Only reset the lamp operating time after the lamp has been
q
replaced. Otherwise the lamp replacement period is not
indicated correctly.

Replacing the Air Filter

Air filter replacement period

f
It is time to replace the air filter when:
• The air filter is ripped.
• The message is displayed even though the air filter has been
cleaned.

How to replace the air filter

f
The air filter can be replaced even when the projector is suspended from a
ceiling.
Procedure
A
After you turn off the projector's power and the
confirmation buzzer beeps twice, disconnect the
power cable.
B
Remove the air filter.
Put your finger into the recess of the air filter and slide it forward to
remove it.
61