Saving A User's Logo - Epson EH-TW420 User Manual

Saving a User's Logo

You can save the image that is currently being projected as a user's
logo.
When registering a user logo , the current user logo is
q
erased and the default setting is not resumed.
Procedure
A
Project the image you want to use as the user's
logo, and then press the [Menu] button.
Using the remote control
Using the control panel
B
From the configuration menu, select "Extended" -
"User's Logo". p.30
s
Check the buttons you can use and the operations they perform in
the guide under the menu.
• If "User's Logo Protect" from "Password Protect" is set
q
to "On", a message is displayed and the user's logo
cannot be changed. You can make changes after setting
"User's Logo Protect" to "Off".
• If "User's Logo" is selected when Keystone, E-Zoom, or
Aspect are being performed, the function currently being
performed is cancelled.
63
p.24
s