Acoustics; Operating And Storage Specifications - Dell PowerEdge M610 Technical Manual

Dell
Temperature
Operating
Storage
Relative Humidity
Operating
Storage
Maximum Vibration
Operating
Storage
Maximum Shock
Operating
Storage
Altitude
Operating
Storage
Airborne contaminant level
Class G1 or lower as defined by ISA-S71.04-1985 (G1 maximum corrosive contaminant levels
measured at ≤ 50% relative humidity)

5.4 Acoustics

The acoustical design of the PowerEdge M610 reflects
standards. Sound quality is different from sound power level and sound pressure level in that it
describes how humans respond to annoyances in sound, like whistles, hums, etc. One of the sound
quality metrics in the Dell specification is prominence ratio of a tone.
Table 4 shows the acoustical performance for a typical configuration of the M1000e chassis with eight
PowerEdge M610 blade servers installed. Acoustical performance varies with hardware
configurations.
Dell PowerEdge M610 Technical Guide

Operating and Storage Specifications

Table 3.
o o
10 to 35 C (50
o
10 C per hour
Note: For altitudes above 2950 feet, the maximum operating
temperature is derated 1
o o
-40 to 65 C (-40
o
of 20 C per hour
20% to 80% (noncondensing) with a maximum humidity gradation of
10% per hour
5% to 95% (noncondensing) with a maximum humidity gradation of
10% per hour
0.26 Grms at 5-350 Hz in operational orientations
1.54 Grms at 10-250 Hz in all orientations
Half sine shock in all operational orientations of 31 G +/- 5% with a
pulse duration of 2.6 ms +/- 10%
Half sine shock on all six sides of 71 G +/- 5% with a pulse duration
of 2 ms +/- 10%
-15.2m to 3048 m (-50 to 10,000 ft)
Note: For altitudes above 2950 ft, the maximum temperature is
o
derated 1 F/550 ft
-16 to 10,600 m (-50 to 35,000 ft)
o o
to 95 F) with a maximum temperature gradation of
o
F/500ft
o o
to 149 F) with a maximum temperature gradation
adherence to Dell's high sound quality
12